wiring diagram AUDI A4 1997 B5 / 1.G Door Mirrors Workshop Manual
Page 4 of 4
66-17
Power mirror adjuster, replacing
- Disconnect battery.
- Remove mirror glass.
Note:
For mirror adjusting units with soldered wires, these should be separated
individually directly at the housing.
Note:
Transfer wire routing from old power mirror adjuster using correct wiring
diagram. - Remove screws -1- (3x)
Tightening torque: 1 Nm (9 in. lb)
- For mirror adjusting units with harness connectors, these should be
removed before disassembly.
- Install wiring into connector housing enclosed with replacement unit.
Pa
ge 4 of 4 Door mirrors
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.66.8